Grid asset monitoring for utilities
Sensors on transformers, cables and substations report to a 24/7 command centre. Theft, tampering and illegal connections show up as they happen.
Every network incident, with its evidence
Each alert opens a case. Sensor logs, GPS trails and camera records are filed with it in time order, ready for investigators and insurers.
See the command centre- PTPT-114, Area 25Tilt and lid openedOpen6m
- F7Feeder F7, MatolaEnergy gap after span 14Open28m
- K3Kiosk K-31, BlantyreLid opened, no permitVerifying41m
- PTPT-087, KanengoGeofence broken, 40 mVerifying1h
- LVLV span 22, MzuzuCurrent step on phase BOpen2h
- CMMeter 4471, MatolaCover opened twiceOpen3h
- SSKanengo substationPerimeter zone 3Closed5h
- CBCabinet C-12, ZombaDoor event in work windowClosed7h
- PTPT-052, Area 49Overload, 112% for 40 minClosed9h
- P9Pole P-9, LiwondeImpact on cross-armClosed11h
Read-only on your network
Smart Protect sensors measure and report. They have no control outputs and no connection to SCADA, so switching and protection stay with your engineers. Your engineers also approve every sensing point before field work starts.
What Smart Protect catches. From the substation fence to the customer meter.
Flags tampering on transformers
Tilt, lid and vibration readings are checked against open work permits, so a crew on a job raises no alarm.
- PT-114: lid opened, no permitTilt 38°, camera 2 recordingOpen
- PT-087 left its geofenceMoved 40 m from pole P-21
- C-12 door opened on permitWork window 22:00 to 02:00
Finds illegal connections on feeders
Interval energy on each feeder is balanced against its meters, which shows where bypasses and illegal taps start.
Routes each asset alert to the right team
Field crews, security and police each receive the cases meant for them, ranked by risk to supply.
- Night field crewArea 25 depot, on call
- Security responseVehicle 3, nearest unit
- Utility control roomFor outage impact only
- PoliceOnce the case is verified
Tracks transformers that move
GPS and geofence alerts follow a stolen transformer, so security can find it and bring it back.
- Geofence broken at 03:06
- Live position sent to security
- Vehicle stopped on the M1
- Unit recovered and logged
- Case filed with the police
Installed beside your network
Sensors go only on the assets your engineers approve. A secured RTU time-stamps each reading, holds it through outages and sends it over an encrypted private APN.
- Readings every 5 minutes, or as configured
- No inbound route to your control systems
- In-country hosting where your rules require it
Does it connect to our SCADA network?
No. There is no physical or logical link to live control systems.
Who owns the network data?
You do, raw and processed.
Which assets can it watch?
Ten classes, from substation perimeters to customer meters.
Will Smart Protect records hold up in court?
Evidence is handled to keep its chain of custody intact.
What happens if we stop using Smart Protect?
Data export, revoked credentials, data deletion and site restoration.
